A4 Sedan V6-3.2L (BKH) (2007)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid N110 (From VIN 8E_6A156500), Removing and Installing
Shift Lock Solenoid N110 (from VIN 8E_6A156500), removing and installing - 01J, Continuously Variable Transmission (CVT)
Removing
-
Remove cover for shift mechanism.
-
Disconnect electrical harness connector on Shift Lock Solenoid N110.
-
Press retaining hooks -A- into shift mechanism -arrow- and hold it down.
Note:
^
If retaining hook -A- is broken off, selector mechanism function unit must be replaced.
-
Tip Shift Lock Solenoid N110 down and out in direction of -arrow- so that ball head -1- disengages from operating lever on shift mechanism.
-
Remove Shift Lock Solenoid N110.
Installing
Installation is in reverse order of removal, note the following:
-
Rotate ball head -1- to correct installation position.
-
Guide Shift Lock Solenoid N110 diagonally from above into shift mechanism.
-
Tip Shift Lock Solenoid N110 down in opposite direction of -arrow-.
-
Ball head -1- must be completely engaged in operating lever on shift mechanism.
-
Secure Shift Lock Solenoid N110 on retaining hook -A-.
-
Install cover for shift mechanism.