A4 Sedan V6-3.2L (BKH) (2007)
/Page-1862003.png)
‹› Harness connectors - A -, - B - and - C - on rear side of control module must engage on hydraulic control module.
-
Tighten bolts - arrows -.
-
Install end cover.
Tightening Specifications
After connecting the Transmission Control Module (TCM) (J217), perform the following work:
‹› Complete coding for new Transmission Control Module (TCM) (J217).
‹› Perform adaptation for Transmission Control Module (TCM) (J217).
Use Vehicle Diagnosis, Testing and Information System (VAS 5051B) for this.
