audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ATF, Draining for ATF Flush|Page 6112 > < ATF, Draining for ATF Flush|Page 6110
Page 2
background image

‹› The shut-off valve on the ATF filler system F/CVT transmission (VAS 5162) must be closed.

CAUTION!
‹› Engine must not be started if only a small amount or no ATF is in the transmission after repair work or after significant ATF loss.

‹› In this case, a preliminary filling with 4.5 to 5 liters ATF must be performed.

-

Place used oil collection and extraction device ( V.A.G 1782) under the transmission.

-

Remove ATF inspection plug - B -.

-

Thread connection on shut-off valve of ATF filler system F/CVT transmission (VAS 5162) into opening of ATF inspection plug - B -.

-

Rotate shut-off valve in direction of filler hose - lower arrow -. ATF flows into transmission.

ATF, Draining for ATF Flush|Page 6112 > < ATF, Draining for ATF Flush|Page 6110