A4 Sedan V6-3.2L (BKH) (2007)
/Page-1880001.png)
Fluid - CVT: Service and Repair
ATF Changing or Filling After Repairs
ATF Changing or Filling after Repairs
‹› Rules of cleanliness for working on transmissions. Refer to => [ Clean Working Conditions ] See: Service Precautions/01J Transmission/Clean
Working Conditions.
‹› General repair information. Refer to => [ General Repair Information ] See: Service and Repair/Procedures/01J Transmission/General Repair
Information.
Special tools, testers and auxiliary items required
‹› Triple square socket driver (3357)
‹› ATF filler system F/CVT transmission (VAS 5162)
‹› Old oil collecting and extracting device (VAG 1782 )
‹› Safety glasses
Work Procedure
‹› Move vehicle onto a lifting platform or over a work pit so that it stands absolutely horizontal.
CAUTION!
Do not allow the engine to run without filling with Automatic Transmission Fluid (ATF) and do not tow the vehicle.
‹› Rules of cleanliness for working on transmissions. Refer to => [ Clean Working Conditions ] See: Service Precautions/01J Transmission/Clean
Working Conditions.
‹› General repair information. Refer to => [ General Repair Information ] See: Service and Repair/Procedures/01J Transmission/General Repair
Information.
‹› Observe disposal regulations!
‹› Always blow compressed air through the ATF cooler and pipes (max. 10 mbar) and replace the auxiliary ATF filter before installing a replacement
transmission. Refer to => [ Auxiliary ATF Filter ] See: Fluid Filter - CVT/Service and Repair/Removal and Replacement/01J
Transmission/Auxiliary ATF Filter.
-
Fill the ATF filler system F/CVT transmission ( VAS 5162) with ATF for CVT transmissions.
‹› ATF specification, refer to => [ Capacities ] See: Specifications/Capacity Specifications/01J Continuously Variable Transmission.
CAUTION!
The ATF filler tool must be clean and the ATF must not be mixed with any other ATF oils!
-
Secure the filled reservoir of the ATF filler system F/CVT transmission (VAS 5162) as high as possible on the vehicle.
