A4 Sedan V6-3.2L (BKH) (2007)
/Page-2014005.png)
-
Insert hydraulic control assembly into transmission. Align unit properly to fit without jamming.
‹› When installing control module, make sure that shifting cam (item 1 in Fig. A38-0094 ) engages into free groove - arrow - on control piston - B -.
-
Hand-tighten bolts - arrows -. Bolt - arrow 1 - is shorter than the other two bolts.
-
Check that cover is mounted properly.
‹› Locating tab - B - must be inserted into hole intended for it on the transmission.
