A4 Sedan V6-3.2L (BKH) (2007)
Constant Velocity Joint: Overhaul
Triple Roller Joint AAR 2900, Disassembling and Assembling
Triple Roller Joint AAR 2900, Disassembling and Assembling
Special tools, testers and auxiliary items required
‹› Sleeve (VW 416 B)
‹› Punch (VW 412)
‹› Sleeve (VW 426)
‹› Sleeve (3110)
‹› Puller (Kukko 12/1)
‹› Press Piece (2050)
‹› CV Joint Boot Clamp Tool (V.A.G 1275)
‹› Circlip Pliers (VW 161 A)
‹› Pressure Spindle (3207)
Disassembling
-
Knock out cap.
‹› Use old bolt to knock out.
‹› Hold shaft at approximately 20° for this.
Use plastic hammer and Press Support (3110).
-
Remove any shavings in area of cover.
-
Open the large clamping sleeve.
-
Open the small clamping sleeve on the shaft and slide the protective joint boot back.
-
Mark installation position of parts - 1 - to - 3 - with lines.