A4 Sedan V6-3.2L (BKH) (2007)
Installation is in reverse order of removal, noting the following:
‹› Needle bearing is located in the flywheel and must be driven in when flywheel is replaced. Refer to => [ Needle Bearing on Dual Mass Flywheel ]
See: Clutch/Pilot Bearing/Service and Repair/Needle Bearing on Dual Mass Flywheel.
-
Use new bolts when securing.
-
Re-position counter hold tool (10-201) to tighten the bolts.
-
Install clutch pressure plate.
Tightening specifications