A4 Sedan V6-3.2L (BKH) (2007)
Control Module: Service and Repair
01J,0AN Continuously Variable Transmission
Transmission Control Module
‹› Observe general repair notes => [ General Repair Information ] See: Continuously Variable Transmission/Transaxle/Service and
Repair/Procedures/01J,0AN Transmission/General Repair Information.
‹› Rules of cleanliness for working on automatic transmissions => [ Clean Working Conditions ] See: Continuously Variable
Transmission/Transaxle/Service Precautions/01J,0AN Transmission/Clean Working Conditions.
Removing
-
Remove end cover.
-
Remove bolts - arrows - and pull out Transmission Control Module (TCM) (J217) without tilting it.
-
Remove twin lip oil seal - A - from Transmission Control Module (TCM) (J217).
‹› When positioning Transmission Control Module (TCM) ( J217), ensure sensor on control module is not damaged.
Installing
Install in reverse order, paying attention to the following:
‹› Replace gaskets and O-rings.
-
If necessary, clean sensors - A -, - C - and - D - of contamination and metal shavings.