audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Coolant pump and 4/2-way valve with thermostat > < Continued coolant circulation pumpV50 - exploded view

A5

Removing and installing coolant circulation pumpV50
Removing and installing coolant circulation pump -V50-
Special tools and workshop equipment required
   
t  Hose clamps for hoses up to 25 mm -3094-
  W00-0079
t  Hose clip pliers -VAS 6362-
  W00-10427
Removing
–  Remove engine cover panel -arrows-.
  A10-11353
–  Unplug electrical connector -2-.
–  Clamp off coolant hoses using hose clamps -3094-, release hose clips -1- and disconnect coolant hoses.
–  Release fastener -arrow- and lift off coolant circulation pump -V50- from bracket.
Installing
Install in reverse order.
  A19-11324

Coolant pump and 4/2-way valve with thermostat > < Continued coolant circulation pumpV50 - exploded view