–
| Mark allocation of roller rocker fingers for re-installation. |
–
| Carefully remove roller rocker fingers and place them on a clean surface. |
–
| Re-insert camshafts, install retaining frame → Fig. and tighten with old bolts to 8 Nm. |
–
| Secure universal dial gauge bracket -VW 387- with dial gauge -VAS 6079- to cylinder head as shown in illustration. |
–
| Press camshaft against dial gauge by hand. |
–
| Press camshaft away from dial gauge and read off value: |
l
| Axial clearance: 0.100 ... 0.191 mm |
|
|
|