A5
Vehicles without auxiliary heater |
1 - | Radiator |
q | Vehicles with multitronic gearbox 0AW or dual clutch gearbox 0B5: with ATF cooler |
q | If renewed, refill system with fresh coolant |
2 - | Radiator outlet coolant temperature sender -G83- |
3 - | Map-controlled engine cooling system thermostat -F265- |
4 - | Cylinder block |
q | Cylinder bank 1 (right-side) |
q | If renewed, refill system with fresh coolant |
5 - | Non-return valve |
6 - | Cylinder head |
q | Cylinder bank 1 (right-side) |
q | If renewed, refill system with fresh coolant |
7 - | Non-return valve |
8 - | Bleeder screw |
9 - | Heat exchanger for heater |
q | Removing and installing → Rep. gr.87 |
q | If renewed, refill system with fresh coolant |
10 - | Coolant circulation pump -V50- |
q | Removing and installing → Rep. gr.87 |
11 - | Coolant temperature sender -G62- |
12 - | Exhaust gas recirculation cooler |
q | If renewed, refill system with fresh coolant |
13 - | Non-return valve |
14 - | Non-return valve |
15 - | Cylinder head |
q | Cylinder bank 2 (left-side) |
q | If renewed, refill system with fresh coolant |
16 - | Filler cap |
q | Checking pressure relief valve → Anchor |
17 - | Coolant expansion tank |
18 - | Non-return valve |
19 - | Cylinder block |
q | Cylinder bank 2 (left-side) |
q | If renewed, refill system with fresh coolant |
20 - | Coolant shut-off valve |
21 - | Temperature sender for engine temperature regulation -G694- |
22 - | Engine oil cooler |
q | If renewed, refill system with fresh coolant |
23 - | Coolant pump |
Vehicles with auxiliary heater |
1 - | Radiator |
q | Vehicles with multitronic gearbox 0AW or dual clutch gearbox 0B5: with ATF cooler |
q | If renewed, refill system with fresh coolant |
2 - | Radiator outlet coolant temperature sender -G83- |
3 - | Map-controlled engine cooling system thermostat -F265- |
4 - | Auxiliary heater |
q | With circulation pump -V55- |
q | Removing and installing → Rep. gr.82 |
5 - | Cylinder block |
q | Cylinder bank 1 (right-side) |
q | If renewed, refill system with fresh coolant |
6 - | Non-return valve |
7 - | Cylinder head |
q | Cylinder bank 1 (right-side) |
q | If renewed, refill system with fresh coolant |
8 - | Non-return valve |
9 - | Heater coolant shut-off valve -N279- |
q | Removing and installing → Rep. gr.87 |
10 - | Bleeder screw |
11 - | Heat exchanger for heater |
q | Removing and installing → Rep. gr.87 |
q | If renewed, refill system with fresh coolant |
12 - | Coolant circulation pump -V50- |
q | Removing and installing → Rep. gr.87 |
13 - | Coolant temperature sender -G62- |
14 - | Exhaust gas recirculation cooler |
q | If renewed, refill system with fresh coolant |
15 - | Non-return valve |
16 - | Non-return valve |
17 - | Cylinder head |
q | Cylinder bank 2 (left-side) |
q | If renewed, refill system with fresh coolant |
18 - | Filler cap |
q | Checking pressure relief valve → Anchor |
19 - | Coolant expansion tank |
20 - | Non-return valve |
21 - | Cylinder block |
q | Cylinder bank 2 (left-side) |
q | If renewed, refill system with fresh coolant |
22 - | Coolant shut-off valve |
23 - | Temperature sender for engine temperature regulation -G694- |
24 - | Engine oil cooler |
q | If renewed, refill system with fresh coolant |
25 - | Coolant pump |