A5
Fuel tank with attached components - exploded view |
1 - | Bolt |
q | Tightening torque → Rep. gr.26 |
2 - | Mounting for exhaust system |
3 - | Securing strap |
4 - | Fuel line |
q | From fuel filter to engine |
q | Do not kink |
q | Clipped onto fuel tank |
q | Press release tab on pipe connector to disconnect |
5 - | Bolt |
q | 8 Nm |
6 - | Protective plate |
q | For fuel filler neck |
7 - | Overflow hose |
q | Attached to bracket for bumper |
8 - | Rubber cup |
9 - | Filler cap |
q | Screw down until it clicks audibly |
q | Secured to tank flap unit |
10 - | Bolt |
q | To secure fuel filler neck |
q | To eliminate electrostatic charge → Fig. |
q | 20 Nm |
11 - | Fuel tank |
q | Removing and installing → Chapter |
12 - | Breather line |
q | To activated charcoal filter |
q | Do not kink |
q | Press release tab on pipe connector to disconnect |
q | Clipped onto fuel tank |
13 - | Heat shield for fuel tank |
14 - | Nut |
q | 2 Nm |
15 - | Nut |
q | 2 Nm |
16 - | Support bracket |
17 - | Heat shield for fuel tank |
18 - | Nut |
q | 2 Nm |
19 - | Bolt |
q | 20 Nm |
20 - | Nut |
q | 2 Nm |
21 - | Spreader clip |
|