audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing glove compartment lightW6 > < Removing and installing heated driver seat regulatorE94/heated front passenger seat regulatorE95

A5

Removing and installing valet parking buttonE536
Removing and installing valet parking button -E536-
   
Removing
–  Remove glove box → Rep. gr.68.
–  Unplug electrical connector -2-.
–  Release retaining clips -arrow A- and press out trim -3- for Valet parking button -E536--item 1- towards front -arrow B-.
  A96-10551
–  Carefully release retaining clips -arrows- using a small screwdriver.
–  Remove valet parking button -E536--item 1- from trim panel -2- towards front.
Installing
Installation is carried out in the reverse order; note the following:
–  Install glove box → Rep. gr.68.
  A96-10553

Removing and installing glove compartment lightW6 > < Removing and installing heated driver seat regulatorE94/heated front passenger seat regulatorE95