audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Mounting for headlight housing > < Fog lights - vehicles from model year 2012 onwards

A5

Removing and installing headlight housing
Removing and installing headlight housing
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position „0“.
–  Remove lock carrier cover → Rep. gr.63.
–  Unplug electrical connector -4-.
–  Remove bolts -2- and -5-.
–  Use socket with extension to slacken bolt -3- at bottom of headlight housing a few turns.
  Note
Disregard -items 6 and 7-.
–  Remove headlight -1- from body towards front.
  A94-10325
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  When inserting headlight -2- in mounting -1-, make sure that guide rails on headlight engage in guides on mounting -arrows-.
l  Do not use force when inserting headlight in headlight mounting and make sure it engages smoothly.
  A94-10461
–  When inserting headlight -4-, make sure that breather -3- for headlight is pushed evenly onto mounting -2- for breather hose -1- in direction of -arrow-.
  A94-10637
–  Tighten bolts -2, 3, 5-.
–  Install lock carrier cover → Rep. gr.63.
  A94-10325

Mounting for headlight housing > < Fog lights - vehicles from model year 2012 onwards