–
| Remove nut -2- and detach retainer bracket (large) -1-. |
–
| Release bulb holder -3-: on left tail light by turning anti-clockwise -arrow-; on right tail light by turning clockwise. |
–
| Pull bulb holder out of tail light housing. |
–
| Pull reversing light bulb out of bulb holder. |
Installation is carried out in the reverse order; note the following: |
–
| Insert new bulb in bulb holder, taking care not to touch glass part of bulb with bare hands. |
–
| Fit retainer bracket (large) -1- onto stud on inner tail light and tighten nut -2-. |
Note As the nut is tightened the retainer bracket becomes wedged in the rear lid. |
|
|
|