A5 Cabriolet L4-2.0L Turbo (CAEB) (2010)
Engine Oil: Removal and Replacement
Engine oil, extracting and replacing oil filter
Note:
-
Perform oil change at operating temperature.
Special tools and workshop equipment required
-
Oil extractor -V.A.G 1782-
-
Hazet tension band -2171-1-
-
Oil wrench -3417-
-
Socket -32-
-
Socket -36-
Note:
-
Observe waste disposal regulations!
-
Check for cleanliness
2.0L TFSI
-
Remove engine cover.
-
Loosen oil filter with Hazet tension band -2171-1- or oil filter wrench -3417- and remove.
-
Clean oil filter sealing surface on engine.
-
Lubricate rubber seal lightly with oil.
-
Install new filter and tighten.
-
Extract the engine oil.
-
Fill motor oil.
Tightening Specifications
Oil filter .............................................................................................................................................................................................................. 22±2 Nm