A5 Cabriolet L4-2.0L Turbo (CAEB) (2010)
/Page-406001.png)
Clutch Release Bearing: Customer Interest
M/T - Clicking/Creaking When Operating Clutch Pedal
30 Creaking or clicking noises when using clutch pedal
30 11 06
2022990/3
April 7, 2011.
Supersedes Technical Service Bulletin Group 30 number 10 - 04 dated September 1, 2010 for reasons listed below.
AFFECTED VEHICLES
CONDITION
Customer may report creaking or clicking noises from the gearbox when operating the clutch while the engine is off.
In some cases the operation of the clutch pedal is not smooth.
TECHNICAL BACKGROUND
When operating the clutch pedal, a sliding and rolling movement takes place on the contact points between release bearing and release lever. The
creaking noise is caused by the sliding movement.
PRODUCTION SOLUTION
---
SERVICE
