audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Convertible Top Deck Lid:|611111|Page 7142 > < All Technical Service Bulletins for Convertible Top Deck Lid:|611111|Page 7140
Page 4
background image

2. After attaching the stop buffers, check the position of the adjustable center buffer located on the convertible top compartment cover. The total
extended length of the center buffer from base to tip is 21 mm (Figure 5).

3. Check whether this center buffer makes contact with the beam below it when the cover is closed (Figure 6).

^ Fold down the two rear seat backrests if necessary to make the adjustment. A slight readjustment may be necessary to establish contact.

^ Ensure the pressure is not excessive.

Note:

^ The adjustable center buffer is only for the support. Excessive pressure from this buffer will distort the cover.

All Technical Service Bulletins for Convertible Top Deck Lid:|611111|Page 7142 > < All Technical Service Bulletins for Convertible Top Deck Lid:|611111|Page 7140