A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) (2011)
/l4-2.0l_turbo_(caeb)/Page-68001.png)
Battery Control Module: Technical Service Bulletins
Battery - Testing/Charging On BDM Equipped Vehicles
27 Battery testing and charging - vehicles with BDM (J367)
27 10 05
2023282/1
May 5, 2010
Affected Vehicles
Condition
Battery testing and charging for vehicles equipped with a Battery Data Manager (BDM - J367).
Technical Background
When the InCharge 940 is used as a battery charger in auto mode, it performs a battery condition test and may prematurely fail the battery if the charging
takes place at the jumper posts in the engine compartment. This is due to the added resistance in the system between the battery and jumper posts. When
the InCharge 940 is used as a battery charger in manual mode, the battery condition test is not performed.
Production Solution
Not applicable.
Service
TESTING THE BATTERY
VAS scan tool:
Follow Guided Fault Finding battery test plan in service work.
CHARGING THE BATTERY
Midtronics INC-940 diagnostic charging station:
Connect the charging station - auto mode
1. Connect the InCharge 940 positive cable clamp to the positive battery post.
