A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-2294004.png)
CAUTION!
Make sure light does not reflect off the calibration platform.
Reflections affect the Rear View camera and may make it impossible to perform the calibration.
-
Switch on laser - 1 - on calibration platform and align entire calibration platform so that laser beam hits center above of Audi rings.
-
Make sure the Audi rings are centered on the rear. Adjust the laser beam as needed.
-
Switch Distance Laser (VAS 6350/2) on with ON button.
The following display appears and laser is switched on.
