audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Speech Input Control Module, Through October 31, 2008|Page 9028 > < Speech Input Control Module, Through October 31, 2008|Page 9026
Page 3
background image

-

Disconnect electrical connection - 1 -.

-

Remove the bolts - 2 - on the back side.

-

Push Telephone Baseplate (R126) upward out of storage compartment.

Installing

-

Install in reverse order.

Tightening specifications, refer to => [ Fastener Tightening Specifications ] See: Specifications

Telephone Transceiver

The Telephone Transceiver (R36) is located under the front passenger's seat.

Special tools, testers and auxiliary items required

‹› Protective Cap for Cable Connector (VAS 6223/9)

-

Turn off all electrical consumers.

-

Remove ignition key.

-

If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine. 

Use the Vehicle Diagnosis, Testing and Information System (VAS 5051) to do so.

Removing

-

Position right front seat all the way back.

-

Fold back the floor mat. 

-

Disengage cover of E-box - 2 - and open the E-box - 1 -.

Speech Input Control Module, Through October 31, 2008|Page 9028 > < Speech Input Control Module, Through October 31, 2008|Page 9026