A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-2719004.png)
‹› 2 technicians are needed to remove the instrument panel.
-
Carefully pull the instrument panel - 1 - back from the instrument panel central tube - A arrows -.
-
Disengage the bottom of the instrument panel on the bracket - 2 - - arrow B - at the same time.
-
Remove the instrument panel from the vehicle interior and lay it on a soft surface.
Installing
Installation is reverse of removal, but note the following:
CAUTION!
Follow the allocation of the airbag to the instrument panel.
-
Position the instrument panel vent and guide the electrical connectors for the Sunlight Photo Sensor (G107) and speaker through the openings in
the instrument panel.
-
Check if there is a rubber buffer - 3 - on the clamp - 2 - on the lower windshield frame.
-
When sliding the instrument panel - 1 - on, make sure the clips engage in the box-shaped profiles on the bottom side of the instrument panel.
CAUTION!
‹› Follow the safety precautions for pyrotechnic components.
‹› Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
