A5 Quattro Coupe V6-3.2L (CALA) (2009)
Trim Panel: Service and Repair
Cable Operating Lever
Cable Operating Lever
Removing
-
Pull the securing clip - 2 - out of the operating lever - 1 - slightly - arrow A - using a small screwdriver.
-
Pull the operating lever back - arrow B - to release the hood and hold it in this position.
CAUTION!
If the operating lever is pulled out crooked, the mount could be damaged.
-
At the same time, pull the operating lever level with the center of the vehicle and out of the mount - arrow C -.
Installing
Installation is reverse of removal, but note the following:
-
Slide the clip completely into the operating lever.
-
Press the operating lever onto the mount in the mounting bracket and engage it.