A5 Quattro Coupe V6-3.2L (CALA) (2009)
Brake Pad: Service and Repair
FN-3 Front Brake Pads
FN-3 Front Brake Pads
‹› Always replace on both axles.
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Reversible ratchet (V.A.G. 1331/1)
‹› Piston resetting tool (T10145)
Removing
-
Raise vehicle.
-
Remove wheels.
‹› When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!
-
Remove - 13 - caps.
-
For vehicles with the brake wear pad indicator, disconnect the left front connector - 4 -.
-
Lift securing strap slightly at bottom of connector and then rotate 90°.