A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-1397003.png)
-
Insert protective cap in brake caliper groove. Use Trim Removal Wedge (3409) to do so.
-
Carefully slide brake piston into brake caliper. Move brake piston when doing so. Brake piston must be guided over pressure nut, this is only
possible in four positions.
-
After brake piston has been guided onto pressure nut, press it as far as stop into brake caliper.
‹› Ensure pressure nut is not damaged.
-
Install pressure nut clockwise as far as stop.
