A5 Quattro Coupe V6-3.2L (CALA) (2009)
‹› The placement of the camshafts must be exactly within the axial bearings - arrows - of the guide frame.
‹› The compression ring ends - 1, 2 and 3 - must face upward or downward and must never face sideways.
-
Rotate the guide frame with the camshafts inserted while holding them securely in the frame.
-
Rotate camshafts until the threaded holes - arrows - face upward.
-
Check if the camshafts still lie in the guide frame axial bearings.
-
Install the Camshaft Locator (T40133) and tighten the bolts - arrows - to 25 Nm.