A5 Quattro Coupe V6-3.2L (CALA) (2009)
Installing
Installation is in reverse order of removal, note the following:
-
Route the ribbed belt over the ribbed belt pulley in the sequence specified.
1. Generator
2. Idler roller
3. Coolant pump
4. Power-steering pump
5. A/C Compressor
6. Tensioning element for ribbed belt
7. Vibration damper with ribbed belt pulley
‹› When installing the ribbed belt, make sure it is seated correctly on the pulleys.
-
Start the engine and check the belt routing.
-
Install the front noise insulation.