A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-644003.png)
27
Vibration damper
‹› With ribbed belt pulley
‹› Installation is only possible in one position because of the offset holes
‹› Removing and installing, refer to => [ Vibration Damper with Ribbed Belt Pulley ] See: Cylinder Block Assembly/Harmonic Balancer -
Crankshaft Pulley/Service and Repair
Ribbed belt pulley side sealing flange - tightening specifications and sequence
-
Tighten the bolts - arrows - in a diagonal sequence in stages to 9 Nm.
