A5 Quattro Coupe V6-3.2L (CALA) (2009)
‹› Tightening specification and sequence => [ Upper section of oil pan, tightening specifications and sequence ]
8
Oil pan (upper section)
‹› Removing and installing, refer to => [ Oil Pan, Upper Section ] See: Oil Pan/Service and Repair/Oil Pan, Upper Section
9
Alignment bushing
‹› 2 pieces
10
O-ring
‹› Insert into guide frame
‹› Replace
11
Bolt
‹› Insert with locking compound; Locking compound.
‹› 9 Nm
12
Upper oil baffle
13
Gasket
‹› Insert into guide frame
‹› Replace
14
Gasket
‹› Replace
15
Bolt
‹› 9 Nm
16
Oil cooler
‹› See note => [ If large quantities of metal particles or abraded material are detected during engine repairs, it may be an indication for a
damaged crankshaft or rod bearings. To prevent subsequent damage, the following work must be performed after the repair: Oil channels must
be cleaned carefully; replace oil spray jets, oil cooler and oil filter. ] See: Oil Pump/Service and Repair/Oil Pump and Oil Pan Lower Section
‹› Removing and installing, refer to => [ Oil Cooler ] See: Oil Cooler
‹› With oil cooler by-pass valve
17
Bolt
‹› 9 Nm
18
Driveshaft for oil pump
19
Spring
20
Sleeve
‹› 2 pieces
21
Bracket
22
Bolt
‹› 9 Nm