A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-675003.png)
23
Chain sprocket for oil pump
‹› Can only be placed onto driveshaft in one position
24
Bolt
‹› Replace
‹› 30 Nm plus an additional 90° turn
‹› To loosen, counterhold on sprocket with Spanner Wrench (3212)
25
O-ring
‹› Replace
26
Gasket
‹› Replace
27
O-ring
‹› Replace
28
Oil pump
‹› Do not disassemble
‹› Removing and installing, refer to => [ Oil Pump ] See: Oil Pump/Service and Repair/Oil Pump
29
Bolt
‹› 20 Nm
30
Bolt
‹› Replace
‹› Tightening specification and sequence => [ Lower section of oil pan, tightening specifications and sequence ]
31
Seal
‹› Replace
32
Oil drain plug
‹› 30 Nm
Lower section of oil pan, tightening specifications and sequence
