A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-692002.png)
-
Remove bolts - arrows - and lay aside the oil cooler with the coolant hoses - 1 - and - 2 - connected.
Vehicles with the After-Run Coolant Pump (V51):
-
Remove After-Run Coolant Pump (V51). Refer to => [ After-Run Coolant Pump ] See: Cooling System/After-Run Coolant Pump/Service and
Repair/After-Run Coolant Pump and the oil cooler => [ Oil Cooler ] See: Oil Cooler/Service and Repair/Oil Cooler.
All Vehicles
-
Disconnect electrical connector - 1 -.
-
Remove bolt - 3 - and the Oil Pressure Regulation Switch (N428) - 4 -.
Installing
‹› Tightening specifications. Refer to => See: Cylinder Block Assembly/Crankshaft/Service and Repair/Crankshaft Assembly Overview
Installation is in reverse order of removal, note the following:
