A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-1932002.png)
‹› The connecting rods (- A - through - C -) are clipped on to the levers; unclip them carefully so that the lever does not get damaged.
‹› Depending on the production date, there are different versions of the levers and connections on the A/C unit. Refer to => [ Air Conditioner Levers
] See: Description and Operation/A/C System Control .
-
Remove screws - D -.
-
Remove the mounting plate - E - (together with the control motor - F -, the lever, the cam plate and the connector rods) from the A/C.
Installing
Installation is carried out in the reverse order, when doing this note the following.
-
Apply a small quantity of Grease (G 000 150) to the cam plate guides as well as to the pins at the door levers.
-
Make sure the levers, cam plates and connector rod mounting plates - A - are assembled correctly. Refer to => [ Left Retaining Plate with Footwell
Door Motor ] See: Overhaul/Left Retaining Plate with Footwell Door Motor.
-
When installing the mounting plate - A - correctly insert the mounting plate pin - B - and the cam plate - C - into the A/C bracket.
-
Install the screws - D -.
