audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Left Radiator Housing With Temperature Doors|Page 7541 > < Left Radiator Housing With Temperature Doors|Page 7539
Page 1
background image

Air Register: Service and Repair
Right Footwell Vent

Instrument Panel Vents and Air Ducts

Right Footwell Vent

‹› From January, 2008, A/C units which have an additional connection for the glove compartment cooling are being installed. Refer to => [ Glove

Compartment Cooling ] See: Description and Operation/A/C System Components Inside Passenger Compartment. Make sure that the correct right
radiator housing and air intake housing are installed.

Removing

-

Move the passenger seats as far back as possible.

-

Switch off ignition.

-

Remove glove compartment. 

-

Disconnect the harness connector - A - from the temperature sensor (only on the "Comfort" A/C system).

-

Remove the screws - B -.

-

Remove the right footwell vent - C -.

Installing

Installation is carried out in the reverse order, when doing this note the following.

-

Check the A/C Control Head Climatronic Control Module (J255) DTC memory, and erase the malfunction displayed if necessary (only on the
"Comfort" A/C system). Refer to Vehicle diagnosis, testing and information system VAS 5051 in the "guided fault finding"

Left Radiator Housing With Temperature Doors|Page 7541 > < Left Radiator Housing With Temperature Doors|Page 7539