A5 Quattro Coupe V6-3.2L (CALA) (2009)
Air Register: Service and Repair
A/C Unit Air Intake Housing
Instrument Panel Vents and Air Ducts
A/C Unit Air Intake Housing
‹› From January 2008, A/C units which have an additional connection for the glove compartment cooling are being installed. On vehicles without
glove compartment cooling, this connection is sealed with a plug. Make sure that the correct right radiator housing and air intake housing are
installed. Refer to => [ Glove Compartment Cooling ] See: Description and Operation/A/C System Components Inside Passenger Compartment .
Removing
-
Switch on the ignition.
-
Set the air flow direction to "DEF" on the Climatronic Control Module (J255).
-
Move the passenger seats as far back as possible.
-
Switch off ignition.
-
Remove glove compartment.
-
Removing right (passenger) footwell vent, refer to => [ Right Footwell Door Motor ] See: Air Door/Air Door Actuator / Motor/Service and
Repair/Removal and Replacement
-
Remove the screw clips - A - and remove the insulation mat - B -.
-
Remove screws - A -.