A5 Quattro Coupe V6-3.2L (CALA) (2009)
CAUTION!
Danger of leakage.
‹› The couplings - B - and - C - on the refrigerant line - D - with inner heat exchanger must be replaced each time the refrigerant line is opened.
-
Pry the couplings - B - and - C - using a screwdriver - A - out of the refrigerant line - D - with inner heat exchanger - arrow -.
-
Thoroughly clean all parts of the refrigerant line connections (for example, using Cleaning Solution (D 009 401 04)).
-
Check the connector - A - for the refrigerant line with inner heat exchanger for damage.
-
Replace the O-ring seals - B, G -, support rings - C, F - and couplings - D, E - ; version.
‹› Note the installation instructions for O-ring seals. Refer to => [ Refrigerant Circuit O-Ring Seals ] See: Description and Operation/Refrigerant
Circuit.
-
Coat O-ring seals lightly with refrigerant oil before installing. Refer to => [ Refrigerant Circuit O-Ring Seals ] See: Description and
Operation/Refrigerant Circuit.