A5 Quattro Coupe V6-3.2L (CALA) (2009)
Interior Light Switch: Service and Repair
Central Locking Safe Indicator Lamp
Central Locking SAFE Indicator Lamp
Removing
-
Switch off ignition and remove ignition key.
-
Remove front door trim.
-
Release the retaining clips - arrows -.
-
Remove the central locking LED - 1 - down out of the door trim - 2 -.
Installing
Install in reverse order of removal, observing the following:
‹› The new Central Locking -Safe- Indicator Lamp (K133) must be connected with the door trim wiring harness.
-
Disconnect the electrical wire and connect it with the new electrical wire for the Central Locking -Safe- Indicator Lamp (K133).
-
Slide the central locking LED in until it engages audibly.
-
Install front door trim.