Audi Workshop Service and Repair Manuals

Headlamp Bulb: Service and Repair
Low Beam Headlamp or Daytime Running Lamp Bulb

Low Beam Headlamp or Daytime Running Lamp Bulb

Removing

-

Remove headlamp housings, refer to => [ Headlamp Housing ].  See: Service and Repair/Halogen Headlamps, through 10.2008/Headlamp
Housing

-

Remove the high beam/turn signal housing cover - 1 - from the headlamp housing - arrow -.

-

Remove the bulb - 1 - from the spring clips.

-

Disconnect the electrical connector - 2 - on the high beam bulb.

Installing

Install in reverse order of removal, observing the following:

-

Insert the new bulb into the housing without touching the bulb with bare hands.

-

Position the bulb on the lower spring clip.

-

Press the bulb into the housing past the upper spring clips.

-

Close the housing lid.