A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-3133001.png)
Horn: Service and Repair
High and Low Tone Horns
High and Low Tone Horns
Removing
-
Switch off ignition and remove ignition key.
-
Remove the appropriate front wheel housing liner.
-
Remove the nut - 2 -.
-
Remove the signal horn - 3 - from the bracket.
-
Disconnect the electrical connector - 1 -.
Installing
‹› Tightening specification, refer to => [ Signal Horns Overview ] See: Signal Horns Overview.
Install in reverse order of removal, observing the following:
-
Install front wheel housing liner.
