A5 Quattro Coupe V6-3.2L (CALA) (2009)
-
Install new bolts - 1 - and - 4 - one after another and tighten => [ Subframe, Crossbrace, Stabilizer Bar and Coupling Rod Assembly Overview ]
See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar and Coupling
Rod Assembly Overview.
-
Install new bolts - 2 - and - 3 - one after another and tighten => [ Subframe, Crossbrace, Stabilizer Bar and Coupling Rod Assembly Overview ]
See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar and Coupling
Rod Assembly Overview.
-
Install new bolts - 8 - and - 5 - one after another and tighten => [ Subframe, Crossbrace, Stabilizer Bar and Coupling Rod Assembly Overview ]
See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar and Coupling
Rod Assembly Overview.
-
Install new bolts - 7 - and - 6 - one after another and tighten => [ Subframe, Crossbrace, Stabilizer Bar and Coupling Rod Assembly Overview ]
See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar and Coupling
Rod Assembly Overview.
-
Tighten tunnel crossmember.
-
Check camber value once more => [ Wheel Alignment Specified Values ] See: Specifications.
-
Install right protective joint boot and wheel housing fastener, if removed.
-
Install noise insulation.
CAUTION!
Every time camber is corrected, axle alignment values should be checked.