A5 Quattro Coupe V6-3.2L (CALA) (2009)
-
Remove nuts - 1 - and remove tire pressure monitoring control module (J502) - 1 - upward.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
-
If the center console was pulled out of the instrument panel when pulling the carpet back, insert center console with pins - 1 - in instrument panel -
2 -.
-
Tighten nuts to 2 Nm.
-
The system must be coded if tire pressure monitoring control module (J502) is replaced => [ Tire Pressure Monitoring System Usage ] See: Tire
Monitoring System/Description and Operation/Tire Pressure Monitoring System Usage.