A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-1630001.png)
Fuse Block: Service and Repair
3-Pin Relay/Fuse Panel
3-Pin Relay/Fuse Panel
Removing
-
Switch off ignition and remove ignition key.
-
Remove driver's storage compartment.
-
Disengage the 3-pin relay/fuse panel by pressing the retaining springs in the - direction of the arrow - and remove the relay/fuse panel - 1 -.
-
Unclip the fuse panel on the relay and fuse panel.
-
Remove the relay and control modules.
-
Release the retaining clips - arrows - and press the relay carrier - 2 - back and out of the bracket - 1 -.
