A5 Quattro Coupe V6-3.2L (CALA) (2009)
Power Distribution Module: Service and Repair
Vehicle Electrical System Control Module
Removing
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions" Vehicle diagnosis, testing and information system VAS 5051.
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Switch off ignition and remove ignition key.
-
Remove the driver side instrument panel cover.
-
Disengage the 3-pin relay/fuse panel by pressing the retaining springs in the - direction of the arrow - and remove the relay/fuse panel - 1 -.
-
Remove the electrical wire - 1 - on the 4-pin relay/fuse panel.