A5 Quattro Coupe V6-3.2L (CALA) (2009)
Information Bus: Service and Repair
Instrument Panel CAN Cut-Off Connector Mount
Instrument Panel CAN Cut-Off Connector Mount
Removing
-
Remove glove compartment.
-
Remove the Instrument Panel Can Cut-Off Connector (T46s), refer to => [ Instrument Panel CAN Cut-Off Connector ] See: Instrument Panel
CAN Cut-Off Connector.
-
Slide the locking lever - 2 - into the "open " position - arrow -.
-
Press the release - 1 - and press the mount - 3 - for the Instrument Panel Can Cut-Off Connector (T46s) back.
Installing
Install in reverse order of removal, observing the following:
-
Slide the locking lever - 1 - on the mount into the " closed" position.
‹› Both markings - arrows - must align.
-
Install the Instrument Panel Can Cut-Off Connector (T46s), refer to => [ Instrument Panel CAN Cut-Off Connector ] See: Instrument Panel CAN
Cut-Off Connector.