A5 Quattro Coupe V6-3.2L (CALA) (2009)
Specified value: infinite (Infinity).
If the specified value was not obtained:
-
Replace the faulty Knock Sensor (KS) 1 (G61). Refer to appropriate service information.
If the specified value was obtained:
Checking wiring
If the manufacturers test box is being used, perform the following step.
-
Install the test box.
If the manufacturers test box is not being used, perform the following step.
-
Remove the Motronic Engine Control Module (ECM) (J623). Refer to appropriate service information.
-
Using a multimeter, Check the Knock Sensor electrical harness connector to the Motronic Engine Control Module (ECM) (J623) electrical harness
connector T60 for an open circuit.
Specified value: 1.5 ohms Max.