A5 Quattro Coupe V6-3.2L (CALA) (2009)
-
Using a jumper wire, connect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector terminals 1 to 2.
-
Check the value indicated on the scan tool display.
If the value jumps to approx. 140.0° C
-
End diagnosis and switch the ignition off.
-
Replace the Engine Coolant Temperature (ECT) Sensor (G62). Refer to appropriate service information.
If indication remains at approx. -40.0° C:
°Testing if display approx. 140.0 C
-
Disconnect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector - arrow -.