A5 Quattro Coupe V6-3.2L (CALA) (2009)
Seat Occupant Sensor: Service and Repair
Seat Occupied Recognition Assembly Overview
Seat Occupied Recognition Assembly Overview
CAUTION!
The replacement part (service kit) for the seat occupied recognition system is already precalibrated and must not be separated under any
circumstances. The service kit consists of:
‹› Passive Occupant Detection System Control Module -J706
‹› Passive Occupant Detection System Pressure Sensor -G452
‹› Passive Occupant Detection System Mat
‹› Seat cushion
‹› Wiring harness between the passive occupant detection system control module -J706 and passive occupant detection system pressure
sensor -G452.
CAUTION!
Follow the safety precautions for the seat occupied recognition system => [ Passive Occupant Detection Sensor Additional Safety
Precautions ] See: Service Precautions.
‹› The seat occupied sensor is only installed in the front passenger seat.
1
Seat Occupied Recognition Pressure Sensor (G452)
‹› Is a component with the seat occupied recognition mat