A5 Quattro Coupe V6-3.2L (CALA) (2009)
‹› Disregard - items 2 and 3 -.
-
Remove the backup lamp switch (F4) from the selector shaft cover.
Installing
-
Install the backup lamp switch (F4) into the selector shaft cover. Tightening specification.
-
Connect the connector - 2 - on the backup lamp switch (F4).
‹› Disregard - item 1 - and - item 3 -.
-
Tighten the tunnel crossmember - arrows - => [ (Item 2) Bolt ] See: Transmission and Drivetrain/Manual Transmission/Transaxle/Transmission
Mount/Service and Repair/Tunnel Crossmember, Transmission Mount and Support Assembly Overview.