A5 Quattro Coupe V6-3.2L (CALA) (2009)
Fuel Pressure Sensor: Service and Repair
Fuel Pressure Sensor
Removing
-
Remove upper section of intake manifold => [ Upper Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Upper Intake Manifold.
-
Disconnect electronic connector from fuel pressure sensor (G247) - 4 -.
-
Remove fuel pressure sensor (G247) - 4 -.
Installing
Installation is in reverse order.
‹› Tightening specification: lower intake manifold with fuel rail assembly overview => [ Lower Intake Manifold with Fuel Rail Assembly Overview ]
See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Lower Intake Manifold with Fuel Rail Assembly Overview.
-
Install upper section of intake manifold => [ Upper Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Upper Intake Manifold.