A5 Quattro Coupe V6-3.2L (CALA) (2009)
-
Disengage the hook - arrow - on the seat position sensor - 2 - from the seat pan lower frame - 1 -.
-
Open the corrugated tube and remove the wire with the 10-pin seat belt latch connector.
‹› Connector station connectors, refer to => [ Connector Station Connectors ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Manual Standard Front Seats.
‹› Modular wiring routing with corrugated tube on front seat, refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ] See: Body
and Frame/Seats/Service and Repair/Removal and Replacement/Manual Standard Front Seats.
Driver seat: