A5 Quattro Coupe V6-3.2L (CALA) (2009)
Wiring Harness: Service and Repair
Suppressor
Suppressor
Removing
-
Remove fuse panel B inside the engine compartment E-box. Refer to => [ Fuse Panel B in Engine Compartment E-Box ] See: Fuse Block/Service
and Repair/Fuse Panel B in Engine Compartment E-Box.
‹› The electrical connectors do not need to be disconnected.
-
Disconnect the cable tie - 2 -.
-
Disconnect the electrical connector - 1 -.
-
Remove the Suppressor (C24) - item 3 -.
Installing
Install in reverse order of removal, observing the following:
‹› When installing, install cable ties at same location.
-
Install fuse panel B into the engine compartment E-box. Refer to => [ Fuse Panel B in Engine Compartment E-Box ] See: Fuse Block/Service and
Repair/Fuse Panel B in Engine Compartment E-Box.